Progressive Slot Machine Jammer 470MHZ frequency straight EMP Jammer

Progressive Slot Machine Jammer 470MHZ frequency straight EMP Jammer
Introduction:
Working voltage: 36 v
Working pattern:470 MHZ frequency straight
Antenna pattern: built-in + strengthen external (removable)
Charge time: 20 mins per hole, total 1 hour
Instrument color: black
Size: 85 x50x21mm
Instrument power: 10 w
Power switch: double
Cooling mode: internal heat sink + temperature protection
Applicable models: single pokies, attachment slot machines, roulette machine, COINS, paper money, lottery type,the machine in Europe and America, mainland machines, 3 d animal, 3 d racing.
Work process:
1, through the high frequency inductive power supply for power oscillation signal processing, sideways to the appropriate frequency.
2, through the special RF transistor pulse oscillation circuit.The inductive signal amplification processing after finishing.
3, through the high frequency coil output rf signal sorting again high magnetic field of electromagnetic wave signal output

Instrument characteristics: the latest commissioning high frequency radio frequency signal,
it is suitable for the machine more and stronger flash alarm prevention ability.Adopt imported transistor has a strong compression capacity.Using grouping hole charge, the power supply voltage can be higher,
Charging bore three each 15 to 20 minutes, try not to overshoot.

Working on separator principle: game consoles and separator can emit high frequency electromagnetic wave,
the console control chip on the motherboard have points, with game consoles can interfere with the game board,
coin, key points, high frequency magnetic field signal can penetrate the inside of the machine wire, resistor,
capacitor, chip, IC, transistor, SCM, etc., after the interference on the points on the integrated circuit
receives signals or refund money, the machine will automatically on or refund COINS, electric equipment
is made up of thousands of electronic components, electrical engineer is the most headache is electromagnetic interference,
especially in high frequency, ultra high frequency electromagnetic interference, the problem is now and in the future is difficult to conquer.

Launch:
1, enameled wire coil is made of high quality, precision round, more standard and more stable
2, imported high power transistor (power stronger)
3, the latest debug method, power is more powerful
Use the tip:
The instrument while there is no frequency regulation and power regulation function,
but can be by adjusting the number of turns of external antenna or density to adjust the power of the launch, and frequency
The more laps, the higher the frequency

Manual:
1. Charge jammer for 1 hour (there are 3 holes,charge every hole for 20 mins)
2. Put antenna on
3. Take the “power switch” on (NO.1 and 2)
4. Put jammer near the coin or bill acceptor
5. Press the emitter switch
[contact-form-7 id=”191″ title=”Contact form 1″]